How Much Does It Cost to Build a 10×10 Hip Shed?
Pricing assumptions
- Pricing basis:our engine's baseline materials price table, built from Charlotte, NC–area retail estimates (spot-checked against Home Depot listings) — the region we operate in, not a location-specific quote for your ZIP code. Lumber and materials prices vary by region and week; treat the total as a planning baseline and check your local supplier.
- Price effective date: 2026-08-18. This date moves whenever the underlying price table is updated.
- Waste factors: included — a 10% waste allowance on framing lumber and sheet goods (higher on hip roofs and around openings), matching what the engine assumes for every quote it generates.
- Excluded: sales tax, delivery/freight, tools, permits, and site work (grading, foundation excavation). Labor is shown separately below only when an estimate is available — it is never folded into the materials number above.
Materials Cost Breakdown
| Category | Estimated Cost | % of Materials Total |
|---|---|---|
| Framing Lumber | $678 | 15% |
| Roofing (Shingle) | $584 | 13% |
| Exterior Trim, Soffit & Paint | $569 | 12% |
| Sheathing | $569 | 12% |
| Siding | $481 | 10% |
| Doors & Windows | $469 | 10% |
| Foundation | $382 | 8% |
| Fasteners | $298 | 6% |
| Housewrap & Rain Screen | $295 | 6% |
| Caulk, Flashing & Consumables | $171 | 4% |
| Hardware & Connectors | $149 | 3% |
| Materials Total | $4,645 | 100% |
DIY vs. Hiring the Framing Out
- DIY (materials only): $4,645 — you supply the labor.
- If you hire out the framing: add an estimated $3,640 in crew labor (roughly 6 build days for a 2-person crew), for a materials-plus-labor total of $8,285. This is crew labor only — it excludes contractor markup, permits, and site work, so a real contractor quote will run higher.
Frequently Asked Questions
- How much does it cost to build a 10×10 hip shed?
- Based on our engine's default materials bill of materials for the 10×10 Hip Pavilion Shed plan, the computed materials cost is $4,645. The materials figure on this page is live from the framing engine. As a rough guide, a 10×10 pyramid hip shed at this spec runs on the order of $3,000–$4,400 in materials; the four-plane roof uses more rafter cutting than a gable of the same footprint, offset by having no ridge board and a small, efficient plan.
- What's included in this materials estimate?
- The estimate covers every material line in the plan's bill of materials — framing lumber, sheathing, roofing, siding, doors & windows, fasteners, and hardware — priced at the engine's default rates. It excludes taxes, delivery, tools, and (unless shown below) labor. See the assumptions block on this page for the full list.
- Does this include labor to build it?
- No — the number above is materials only. If you hire out the framing, our engine also computes a separate crew-labor estimate of $3,640 (about 6 build days for a 2-person crew), for a materials-plus-labor total of $8,285. That figure excludes contractor markup, permits, and site work — it is not a contractor quote.
- What's the biggest cost driver for a 10×10 shed?
- Framing Lumber is the largest line item at $678, roughly 15% of the total materials cost. The full category breakdown is on this page.