How Much Does It Cost to Build a 16×20 A frame Shed?
Pricing assumptions
- Pricing basis:our engine's baseline materials price table, built from Charlotte, NC–area retail estimates (spot-checked against Home Depot listings) — the region we operate in, not a location-specific quote for your ZIP code. Lumber and materials prices vary by region and week; treat the total as a planning baseline and check your local supplier.
- Price effective date: 2026-08-18. This date moves whenever the underlying price table is updated.
- Waste factors: included — a 10% waste allowance on framing lumber and sheet goods (higher on hip roofs and around openings), matching what the engine assumes for every quote it generates.
- Excluded: sales tax, delivery/freight, tools, permits, and site work (grading, foundation excavation). Labor is shown separately below only when an estimate is available — it is never folded into the materials number above.
Materials Cost Breakdown
| Category | Estimated Cost | % of Materials Total |
|---|---|---|
| Framing Lumber | $1,627 | 21% |
| Sheathing | $1,420 | 18% |
| Roofing (Shingle) | $1,324 | 17% |
| Foundation | $910 | 12% |
| Fasteners | $476 | 6% |
| Doors & Windows | $469 | 6% |
| Exterior Trim, Soffit & Paint | $439 | 6% |
| Hardware & Connectors | $312 | 4% |
| Siding | $296 | 4% |
| Housewrap & Rain Screen | $223 | 3% |
| Caulk, Flashing & Consumables | $189 | 2% |
| Materials Total | $7,686 | 100% |
DIY vs. Hiring the Framing Out
- DIY (materials only): $7,686 — you supply the labor.
- If you hire out the framing: add an estimated $5,440 in crew labor (roughly 9 build days for a 2-person crew), for a materials-plus-labor total of $13,126. This is crew labor only — it excludes contractor markup, permits, and site work, so a real contractor quote will run higher.
Frequently Asked Questions
- How much does it cost to build a 16×20 a frame shed?
- Based on our engine's default materials bill of materials for the 16×20 A-Frame Cabin plan, the computed materials cost is $7,686. The From-$ figure is computed live from the BOM for the finishes you choose. As a rough guide a 16×20 classic A-frame runs on the order of $14,000–$19,000 in materials. The roof-to-deck form is roofing-heavy: there is no wall cladding at all on the long sides, and every square foot of that surface is roof assembly instead. The live number reflects the swap.
- What's included in this materials estimate?
- The estimate covers every material line in the plan's bill of materials — framing lumber, sheathing, roofing, siding, doors & windows, fasteners, and hardware — priced at the engine's default rates. It excludes taxes, delivery, tools, and (unless shown below) labor. See the assumptions block on this page for the full list.
- Does this include labor to build it?
- No — the number above is materials only. If you hire out the framing, our engine also computes a separate crew-labor estimate of $5,440 (about 9 build days for a 2-person crew), for a materials-plus-labor total of $13,126. That figure excludes contractor markup, permits, and site work — it is not a contractor quote.
- What's the biggest cost driver for a 16×20 shed?
- Framing Lumber is the largest line item at $1,627, roughly 21% of the total materials cost. The full category breakdown is on this page.