Skip to main content

6×8 Walk-In Chicken Coop Plans for Up to 8 Chickens

Compact walk-in coop plans for up to 8 chickens — nesting boxes, roosts, pop door with ramp, and ridge vent modeled in the framing drawings, cut list, and BOM.

Get These Plans — $99See the 3D preview

7-day free trial, then $99 once. Framing drawings, cut list, and BOM for this exact coop.

6×8 Walk-In Chicken Coop for Up to 8 Chickens — photorealistic render
Quick answer: The 6×8 Walk-In Chicken Coop for Up to 8 Chickens is a 6′ × 8′ gable coop plan for DIY builders in the US, with full framing drawings, an optimized cut list, and a complete materials BOM — $99 one-time for the whole plan set, no subscription required.

Floor Area

48 sq ft

Dimensions

6′ × 8′

Wall Height

7′

Roof Pitch

6/12

What the Plan Models

The 3D plan, framing drawings, and BOM include the coop house with a walk-in clean-out door and window, an exterior-access nesting box bank, roost bars, a pop door with ramp, a ridge vent, predator latches, and (on run plans) a hardware-cloth run on 4×4 posts with a ground apron under the extended roof. Feeders, waterers, and automatic door openers are accessories you add after the build.

About This Design

Forty-eight square feet houses eight hens at the engine's 4 square feet per bird and is still small enough to tuck along a fence line. The 6×8 gable coop keeps the clean-out door on the gable end, a high side window for daylight, and a hardware-cloth ridge vent sized to the floor so the coop breathes without a draft at roost height.

Inside, a three-bay nesting box bank bumps out the side wall with an exterior lift-up lid, 120 linear inches of roost step up the opposite wall, and a 16-inch pop door with a cleated ramp opens onto whatever yard you fence. The extra two feet over the 6×6 go to the roost wall, which is where a flock of eight needs them.

Key Features

  • 48 sq ft walk-in coop sized for up to 8 hens at 4 sq ft per bird
  • Three-bay exterior-access nesting box bank with lockable lift-up lid
  • Stepped roost bars totaling 120 linear inches on the wall opposite the nests
  • 16×22 pop door with cleated ramp, plus a 32-inch clean-out door
  • Continuous hardware-cloth ridge vent sized to the floor area

Build Notes

Frame the shell, then cut the nest-bank and pop-door rough openings from the wall framing drawings before siding. The nest bank hangs on the studs at an 18-inch sill; the roost bars are removable 2×4s on cleats, stepped so no bar sits over a nest.

Screen the ridge vent with ½-inch hardware cloth before the cap goes on, and use a slide-bolt latch on the pop door — raccoons open simple hooks. No run is framed in this plan; fence a yard off the pop door or choose the 8×12 coop-with-run.

Best For

Best for a small backyard flock of up to 8 hens where you want to walk in and clean without a reach-in hatch. A smaller flock can save with the 6×6; if you want the day yard framed under the same roof, choose the 8×12 coop-with-run.

Interactive 3D Preview

Loading 3D preview…

Frequently Asked Questions

How much does a 6×8 coop cost to build?

The materials estimate on this page is computed live from the plan's BOM: framing, sheathing, siding, roofing, the nesting box bank, roost bars, pop door hardware and ramp, ridge vent, and predator latches. Feeders, waterers, bedding, and an automatic pop-door opener are accessories outside the BOM.

Do I need a permit for a 6×8 coop?

At 48 square feet this almost always falls under accessory-structure permit exemptions, but setbacks, HOA rules, and livestock ordinances still apply. Confirm backyard poultry is allowed in your zoning district before you pour footings.

What materials are included in the 6×8 coop plans?

The plans include a complete framing package with cut list and materials BOM covering lumber, sheathing, roofing, siding, fasteners, and hardware. Nesting boxes, roosts, pop door with ramp, and ventilation are modeled in the plan and BOM. On run plans the BOM also carries the run's posts, rails, hardware cloth, and ground apron.

Related Coop Plans